LM2902-EP系列介绍资料

您当前的位置：首页 > 放大器 > 运算放大器 (op amps) > 通用运算放大器 > LM2902-EP

LM2902-EP

正在供货

四通道 26V 1.2MHz 运算放大器（增强型产品）

立即搜索现货

产品详情|
产品购买|

产品详情

说明
特性
参数
封装 | 引脚 | 尺寸

This device consists of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices) and V_CC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply voltage systems. For example, the LM2902 can be operated directly from the standard 5-V supply that is used in digital systems and easily provides the required interface electronics without requiring additional ±15-V supplies.

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of -55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree
ESD Protection <500 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model C = 200 pF, R = 0); 1500 V Using Charged Device Model
ESD Human Body Model >2 kV Machine Model >200 V and Charge Device Model = 2 kV For K-Suffix Devices.
Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ
Low Input Bias and Offset Parameters:
- Input Offset Voltage . . . 3 mV Typ
- Input Offset Current . . . 2 nA Typ
- Input Bias Current . . . 20 nA Typ
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage:
- Non-V devices . . . 26 V
- V-Suffix devices . . . 32 V
V-Suffix devices . . . 32 V D Open-Loop Differential Voltage Amplification . . . 100 V/mV Typ
Internal Frequency Compensation

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

Number of channels	4
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	26
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	3
Rail-to-rail	In to V-
GBW (typ) (MHz)	1.2
Slew rate (typ) (V/µs)	0.5
Vos (offset voltage at 25°C) (max) (mV)	7
Iq per channel (typ) (mA)	0.175
Vn at 1 kHz (typ) (nV√Hz)	35
Rating	HiRel Enhanced Product
Operating temperature range (°C)	-55 to 125
Offset drift (typ) (µV/°C)	0
Features	Standard Amps
Input bias current (max) (pA)	250000
CMRR (typ) (dB)	80
Iout (typ) (A)	0.04
Architecture	Bipolar
Input common mode headroom (to negative supply) (typ) (V)	0
Input common mode headroom (to positive supply) (typ) (V)	-1.5
Output swing headroom (to negative supply) (typ) (V)	0.005
Output swing headroom (to positive supply) (typ) (V)	-2

TSSOP (PW)

32 mm² 5 x 6.4

产品购买

商品型号
封装
工作温度
包装
价格
现货库存
操作

* 我的问题/建议：
* 联系电话：
上传图片（选填）：	请您提交2M以内的jpg,gif,png格式文件
投诉订单号（选填）：

h1_key

LM2902-EP

四通道 26V 1.2MHz 运算放大器（增强型产品）

4000-306-326