This GREEN Rectifier controller is a high-performance controller and driver for standard and logic-level N-channel MOSFET power devices used for low-voltage secondary-side synchronous rectification.
The combination of controller and MOSFET emulates a near-ideal diode rectifier. This solution not only directly reduces power dissipation of the rectifier but also indirectly reduces primary-side losses as well, due to compounding of efficiency gains.
Using drain-to-source voltage sensing, the UCC24610 is ideal for Flyback and LLC-resonant power supplies but can also be used with other power architectures. The UCC24610 is optimized for output voltages from 4.5 V to 5.5 V, and is suitable for use with lower and higher output voltages as well.
The UCC24610 offers a programmable false-triggering filter, a programmable timer to automatically switch to light-load mode at light load, and a SYNC input for optional use in continuous conduction mode (CCM) systems. Protection features on TON and EN/TOFF pins prevent run-away on-time due to open-circuit or short-circuit fault conditions.
This device is available in an 8-pin SOIC package and an 8-pin, 3.0-mm × 3.0-mm SON package with an exposed thermal pad.
| Topology | Active-clamp flyback, Active-clamp forward, CCM, DCM, Forward, Full bridge, Half bridge, LLC, Quasi resonant |
| UVLO thresholds on/off (V) | 4.4/4.2 |
| Switching frequency (max) (kHz) | 600 |
| Features | 600kHz operation, Automatic Light Load Management, Compatible with CCM, Synchronous Rectifier, VDS Sensing |
| Operating temperature range (°C) | -40 to 125 |
| Control mode | VDS sensing |
| Device type | Controllers |
| Rating | Catalog |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |
| VSON (DRB) | 8 | 9 mm² 3 x 3 |