The OPA2677 provides the high output current and low distortion required in emerging xDSL and Power Line Modem driver applications. Operating on a single +12V supply, the OPA2677 consumes a low 9mA/ch quiescent current to deliver a very high 500mA output current. This output current supports even the most demanding ADSL CPE requirements with > 380mA minimum output current (+25°C minimum value) with low harmonic distortion. Differential driver applications will deliver < 85dBc distortion at the peak upstream power levels of full rate ADSL. The high 200MHz bandwidth will also support the most demanding VDSL line driver requirements.
Specified on ±6V supplies (to support +12V operation), the OPA2677 will also support a single +5V or dual ±5V supply. Video applications will benefit from its very high output current to drive up to 10 parallel video loads (15Ω) with < 0.1%/0.1° dG/dP nonlinearity.
The OPA2677 is available in either an SO-8 or QFN-16 and an HSOP-8 PowerPAD™ package.
All trademarks are the property of their respective owners.
| Architecture | Current FB |
| Number of channels | 2 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 4 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 12.6 |
| GBW (typ) (MHz) | 220 |
| BW at Acl (MHz) | 220 |
| Acl, min spec gain (V/V) | 1 |
| Slew rate (typ) (V/µs) | 2000 |
| Vn at flatband (typ) (nV√Hz) | 2 |
| Vn at 1 kHz (typ) (nV√Hz) | 2 |
| Iq per channel (typ) (mA) | 18 |
| Vos (offset voltage at 25°C) (max) (mV) | 4.5 |
| Rail-to-rail | No |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 85 |
| CMRR (typ) (dB) | 55 |
| Input bias current (max) (pA) | 35000000 |
| Offset drift (typ) (µV/°C) | 4 |
| Iout (typ) (mA) | 500 |
| 2nd harmonic (dBc) | 72 |
| 3rd harmonic (dBc) | 81 |
| Frequency of harmonic distortion measurement (MHz) | 5 |
| HSOIC (DDA) | 8 | 29.4 mm² 4.9 x 6 |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |
| VQFN (RGV) | 16 | 16 mm² 4 x 4 |