h1_key

TI(德州仪器) LM397
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) LM397
  • TI(德州仪器) LM397
  • TI(德州仪器) LM397
  • TI(德州仪器) LM397
  • TI(德州仪器) LM397
  • TI(德州仪器) LM397
立即查看
您当前的位置: 首页 > 放大器 > 比较器 > LM397
LM397

LM397

正在供货

单路通用电压比较器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The LM397 device is a single voltage comparator with an input common mode that includes ground. The LM397 is designed to operate from a single 5-V to 30-V power supply or a split power supply. Its low supply current is virtually independent of the magnitude of the supply voltage.

The LM397 features an open-collector output stage. This allows the connection of an external resistor at the output. The output can directly interface with TTL, CMOS and other logic levels, by tying the resistor to different voltage levels (level translator).

The LM397 is available in the space-saving 5-Pin SOT-23 package and is pin-compatible to TI’s TL331, a single differential comparator.

  • TA = 25°C. Typical Values Unless Otherwise
    Specified.
  • 5-Pin SOT-23 Package
  • Industrial Operating Range −40°C to +85°C
  • Single or Dual Power Supplies
  • Wide Supply Voltage Range 5 V to 30 V
  • Low Supply Current 300 µA
  • Low Input Bias Current 7 nA
  • Low Input Offset Current ±1 nA
  • Low Input Offset Voltage ±2 mV
  • Response Time 440 ns (50-mV Overdrive)
  • Input Common-Mode Voltage 0 to VS – 1.5 V
Number of channels1
Output typeOpen-collector, Open-drain
Propagation delay time (µs)0.44
Vs (max) (V)30
Vs (min) (V)5
Vos (offset voltage at 25°C) (max) (mV)7
Iq per channel (typ) (mA)0.25
Input bias current (±) (max) (nA)250
Rail-to-railIn to V-
RatingCatalog
Operating temperature range (°C)-40 to 85
FeaturesStandard comparator
VICR (max) (V)28.5
VICR (min) (V)0
SOT-23 (DBV)58.12 mm² 2.9 x 2.8
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部