h1_key

TI(德州仪器) TL4242
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) TL4242
  • TI(德州仪器) TL4242
  • TI(德州仪器) TL4242
  • TI(德州仪器) TL4242
  • TI(德州仪器) TL4242
  • TI(德州仪器) TL4242
立即查看
您当前的位置: 首页 > 电源管理 > LED 驱动器 > 汽车 LED 驱动器 > TL4242
TL4242

TL4242

正在供货

可调节 LED 驱动器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The TL4242 device is an integrated, adjustable, constant-current source that can drive loads up to 500 mA. The output current level can be adjusted through an external resistor. The device is designed to supply high-power LEDs. The TL4242 is provided in the DRJ (WSON) package. Protection circuits prevent damage to the device in case of overload, short circuit, reverse polarity, and overtemperature. The connected LEDs are protected against reverse polarity as well as excess voltages up to 45 V.

The integrated PWM input of the TL4242 permits LED brightness regulation by pulse-width modulation (PWM). Due to the high input impedance of the PWM input, the LED driver can be operated as a protected high-side switch.

The TL4242 is characterized for operation from –40°C to 150°C.

  • Adjustable Constant Current up to 500 mA (±5%)
  • PWM Brightness Regulation
  • Wide Input Voltage Range up to 42 V
  • Low Drop Voltage
  • Open-Load Detection
  • Overtemperature Protection
  • Short-Circuit Proof
  • Reverse-Polarity Proof
  • Wide Temperature Range: –40°C to 150°C
Number of channels1
TopologyCurrent Source
RatingCatalog
Operating temperature range (°C)-40 to 125
Vin (min) (V)4.5
Vin (max) (V)40
Vout (min) (V)-1
Vout (max) (V)41
Iout (max) (A)0.5
Iq (typ) (mA)12
FeaturesEnable/Shutdown, Fault Detection, Thermal shutdown
WSON (DRJ)816 mm² 4 x 4
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部