The TPS3619 and TPS3620 families of supervisory circuits monitor and control processor activity by providing backup-battery switchover for data retention of CMOS RAM.
During power on, RESET is asserted when the supply voltage (VDD or VBAT) becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage (VIT). An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above VIT. When the supply voltage drops below VIT, the output becomes active (low) again.
The product spectrum is designed for supply voltages of 3.3 V and 5 V. The TPS3619 and TPS3620 are available in an 8-pin MSOP package and are characterized for operation over a temperature range of –55°C to 125°C.
(1) Additional temperature ranges available - contact factory
| Number of supplies monitored | 1 |
| Threshold voltage 1 (typ) (V) | 2.93 |
| Features | Battery backup switchover, Manual reset capable, PFI/PFO, Reset time delay, Undervoltage monitor only |
| Reset threshold accuracy (%) | 2 |
| Iq (typ) (mA) | 0.04 |
| Output driver type/reset output | Active-low, Push-Pull |
| Time delay (ms) | 100 |
| Supply voltage (min) (V) | 1.65 |
| Supply voltage (max) (V) | 5.5 |
| Rating | HiRel Enhanced Product |
| Watchdog timer WDI (s) | None |
| Operating temperature range (°C) | -55 to 125 |
| VSSOP (DGK) | 8 | 14.7 mm² 3 x 4.9 |
很抱歉,暂时无法提供与“TPS3620-33-EP”系列相匹配的产品,您可以联系专属客服快速找货或在现货搜索框中重新搜索。