The UCC28089 is a versatile BiCMOS controller for dc-to-dc or off-line fixed-frequency switching power supplies. The UCC28089 has dual alternating output stages in dual-alternating push-pull configuration. Both outputs switch at half the oscillator frequency using a toggle flip-flop and duty cycle is limited to less than 50%.
The UCC28089 is optimized for use as the primary-side companion controller for a cascaded converter that has secondary-side control. The device incorporates dead-time programming. The synchronization output also provides dead-time information. The retry and soft-start duration scales with the oscillator clock frequency for high performance fault recovery.
The UCC28089 also provides primary side under-voltage protection (UVLO), and over-current protection. Both the soft start and retry after fault durations scale with oscillator frequency for high performance. The turn-on/off UVLO thresholds are 10.5 V/8.0 V.
| Topology | Full bridge, Half bridge, Push pull |
| Control mode | Current |
| Duty cycle (max) (%) | 50 |
| Switching frequency (max) (kHz) | 1000 |
| Features | Dead time control, Soft start, Synchronization pin |
| UVLO thresholds on/off (V) | 10.5/8 |
| Operating temperature range (°C) | -40 to 105 |
| Rating | Catalog |
| Gate drive (typ) (A) | 1 |
| Vin (max) (V) | 14 |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |