h1_key

TI(德州仪器) UC2843AQ
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) UC2843AQ
  • TI(德州仪器) UC2843AQ
  • TI(德州仪器) UC2843AQ
  • TI(德州仪器) UC2843AQ
  • TI(德州仪器) UC2843AQ
  • TI(德州仪器) UC2843AQ
立即查看
您当前的位置: 首页 > 电源管理 > 交流/直流和隔离式直流/直流开关稳压器 > PWM 控制器 > UC2843AQ
UC2843AQ

UC2843AQ

正在供货

具有 8.5V/7.9V UVLO 和 100% 占空比的汽车类单端 500KHz 电流模式 PWM 控制器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The UC2842A/3A/4A/5A family of control ICs is a pin for pin compatible improved version of the UC2842/3/4/5 family. Providing the necessary features to control current mode switched mode power supplies, this family has the following improved features. Start up current is guaranteed to be less than 0.5 mA. Oscillator discharge is trimmed to 8.3 mA. During under voltage lockout, the output stage can sink at least 10 mA at less than 1.2 V for VCC over 5 V.

The difference between members of this family are shown in the table below.

  • Extended Temperature Performance of –40°C to 125°C
  • Optimized for Off-line and DC to DC Converters
  • Low Start Up Current (<0.5 mA)
  • Trimmed Oscillator Discharge Current
  • Automatic Feed Forward Compensation
  • Pulse-by-Pulse Current Limiting
  • Enhanced Load Response Characteristics
  • Under-Voltage Lockout With Hysteresis
  • Double Pulse Suppression
  • High Current Totem Pole Output
  • Internally Trimmed Bandgap Reference
  • 500 kHz Operation
  • Low RO Error Amp

TopologyBoost, Flyback, Forward
Control modeCurrent
Duty cycle (max) (%)100
Switching frequency (max) (kHz)500
FeaturesAdjustable switching frequency, Current limiting, Dead time control, Error amplifier, Multi-topology
UVLO thresholds on/off (V)8.5/7.9
Operating temperature range (°C)-40 to 125
RatingAutomotive
Gate drive (typ) (A)1
Vin (max) (V)28
SOIC (D)829.4 mm² 4.9 x 6
SOIC (D)1451.9 mm² 8.65 x 6
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部