h1_key

TI(德州仪器) INA148
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) INA148
  • TI(德州仪器) INA148
  • TI(德州仪器) INA148
  • TI(德州仪器) INA148
  • TI(德州仪器) INA148
  • TI(德州仪器) INA148
立即查看
您当前的位置: 首页 > 放大器 > 差分放大器 > INA148
INA148

INA148

正在供货

+-200V 共模电压差分放大器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The INA148 is a precision, low-power, unity-gain difference amplifier with a high common-mode input voltage range. It consists of a monolithic precision bipolar op amp with a thin-film resistor network.

The on-chip resistors are laser trimmed for an accurate 1V/V differential gain and high common-mode rejection. Excellent temperature tracking of the resistor network maintains high gain accuracy and common-mode rejection over temperature. The INA148 will operate on single or dual supplies.

The INA148 is available in a small SO-8 surface-mount package and it is specified for the –40°C to +85°C extended industrial temperature range.

  • LOW NONLINEARITY: 0.002% max
  • HIGH COMMON-MODE VOLTAGE:
    • +75V at VS = +5V
    • ±200V at VS = ±15V
  • FIXED DIFFERENTIAL GAIN = 1V/V
  • LOW QUIESCENT CURRENT: 260µA
  • WIDE SUPPLY RANGE:
    • Single Supply: 2.7V to 36V
    • Dual Supplies: ±1.35V to ±18V
  • LOW GAIN ERROR: 0.075% max
  • HIGH CMR: 86dB
  • SO-8 PACKAGE
Number of channels1
Vs (min) (V)2.7
Vs (max) (V)36
CMRR (min) (dB)70
Common-mode input low (min) (V)-200
Common-mode input high (max) (V)200
Input offset (±) (max) (V)0.005
Iq (typ) (mA)0.6
Slew rate (typ) (V/µs)1
Voltage gain (min) (V/V)1
Voltage gain (max) (V/V)1
Small-signal bandwidth (typ) (Hz)100000
RatingCatalog
Operating temperature range (°C)-55 to 125
Gain drift (max) (ppm/°C)3
Gain error (±) (max) (%)0.075
SOIC (D)829.4 mm² 4.9 x 6
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部