The TPS3613-01 supervisory circuit monitors and controls processor activity by providing backup-battery switchover for data retention of CMOS RAM.
During power-on, reset (RESET and RESET) is asserted when the supply voltage (VDD or VBAT) becomes higher than 1.1 V.
Thereafter, the supply voltage supervisor monitors VDD at the SENSE pin through external feedback resistors and keeps reset active as long as SENSE remains below the threshold voltage, VIT.
An internal timer delays the release of the reset state to ensure proper system reset. The delay time starts after SENSE rises above the threshold voltage, VIT.
When SENSE drops below VIT, reset becomes active again.
The TPS3613-01 is available in a 10-pin MSOP package and is characterized for operation over a temperature range of 40°C to +85°C.
All trademarks are the property of their respective owners.
| Number of supplies monitored | 1 |
| Threshold voltage 1 (typ) (V) | 1.15 |
| Features | Battery backup switchover, Chip enable gating, Complimentary output, Undervoltage monitor only |
| Reset threshold accuracy (%) | 1.7 |
| Iq (typ) (mA) | 0.02 |
| Output driver type/reset output | Active-low, Push-Pull |
| Time delay (ms) | 100 |
| Supply voltage (min) (V) | 1.65 |
| Supply voltage (max) (V) | 5.5 |
| Rating | Catalog |
| Watchdog timer WDI (s) | None |
| Operating temperature range (°C) | -40 to 85 |
| VSSOP (DGS) | 10 | 14.7 mm² 3 x 4.9 |
很抱歉,暂时无法提供与“TPS3613-01”系列相匹配的产品,您可以联系专属客服快速找货或在现货搜索框中重新搜索。