h1_key

TI(德州仪器) LM317M
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) LM317M
  • TI(德州仪器) LM317M
  • TI(德州仪器) LM317M
  • TI(德州仪器) LM317M
  • TI(德州仪器) LM317M
  • TI(德州仪器) LM317M
立即查看
您当前的位置: 首页 > 电源管理 > 线性和低压降 (LDO) 稳压器 > LM317M
LM317M

LM317M

正在供货

500mA、40V 可调节线性稳压器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The LM317M is an adjustable 3-terminal positive voltage regulator capable of supplying more than 500-mA over an output-voltage range of 1.25-V to
37-V. The LM317M is exceptionally easy to use and requires only two external resistors to set the output. Furthermore, both line and load regulation are better than standard fixed regulators.

In addition to having higher performance than fixed regulators, the LM317M includes on-chip current limiting, thermal-overload protection, and safe- operating-area protection. All overload protection remains fully functional if the ADJUST terminal is disconnected.

The LM317 is a floating regulator meaning there is no device ground terminal. Quiescent current flows to the load instead of being wasted flowing to ground. Regulated output voltage of hundreds of volts is possible if the maximum input to output differential does not exceed 40-V at any time. Device can be used as a floating current source controlled by a single resistor.

Normally, no capacitors are needed unless the device is more than six inches from the input filter capacitors, in which case an input bypass capacitor of any type is needed. An optional electrolytic or tantalum output capacitor can be added to improve transient response. Ceramic output capacitors can be used but output ringing may be present on transients. The ADJUST terminal can be bypassed with any type of capacitor to achieve high ripple-rejection ratios, which are difficult to achieve with standard three-terminal regulators.

  • Output Voltage Range Adjustable
    from 1.25-V to 37-V
  • Output Current Greater Than 500-mA
  • Internal Short-Circuit Current Limiting
  • Thermal-Overload Protection
  • Output Safe-Area Compensation
  • Q Devices Meet Automotive Performance Requirements
  • Customer-Specific Configuration Control Can Be Supported for Q Devices Along With
    Major-Change Approval
Output optionsAdjustable Output
Iout (max) (A)0.5
Vin (max) (V)40
Vin (min) (V)3.75
Vout (max) (V)37
Vout (min) (V)1.2
Noise (µVrms)38
Iq (typ) (mA)5
Thermal resistance θJA (°C/W)60
RatingCatalog
Load capacitance (min) (µF)0
Regulated outputs (#)1
Accuracy (%)3
PSRR at 100 KHz (dB)22
Dropout voltage (Vdo) (typ) (mV)2000
Operating temperature range (°C)-40 to 125
SOT-223 (DCY)445.5 mm² 6.5 x 7
TO-252 (KVU)366.726 mm² 6.6 x 10.11
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部