h1_key

TI(德州仪器) LM2665
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) LM2665
  • TI(德州仪器) LM2665
  • TI(德州仪器) LM2665
  • TI(德州仪器) LM2665
  • TI(德州仪器) LM2665
  • TI(德州仪器) LM2665
立即查看
您当前的位置: 首页 > 电源管理 > 直流/直流开关稳压器 > 电荷泵(无电感器) > LM2665
LM2665

LM2665

正在供货

输入电压为 1.8V 至 5.5V 的开关电容倍压器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The LM2665 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of 2.5 V to 5.5 V. Two low-cost capacitors and a diode (needed during start-up) are used in this circuit to provide up to 40 mA of output current. The LM2665 can also work as a voltage divider to split a voltage in the range of 1.8 V to 11 V in half.

The LM2665 operates at 160-kHz oscillator frequency to reduce output resistance and voltage ripple. With an operating current of only 650 µA (operating efficiency greater than 90% with most loads) and
1-µA typical shutdown current, the LM2665 provides ideal performance for battery powered systems.

For all available packages, see the orderable addendum at the end of the data sheet.

  • Input Voltage for Voltage Doubler: 2.5 V to 5.5 V
  • Voltage Divider Splits Voltage: 1.8 V to 11 V
  • Doubles or Splits Input Supply Voltage
  • 12-Ω Typical Output Impedance
  • 90% Typical Conversion Efficiency at 40 mA
  • 1-µA Typical Shutdown Current
Vin (min) (V)2.5
Vin (max) (V)5.8
Vout (min) (V)1.8
Vout (max) (V)11
Iout (max) (A)0.04
Regulated outputs (#)1
Switching frequency (min) (kHz)40
Switching frequency (max) (kHz)80
Iq (typ) (mA)0.65
FeaturesEnable
Operating temperature range (°C)-40 to 85
RatingCatalog
TypeCharge pump
SOT-23 (DBV)68.12 mm² 2.9 x 2.8
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部