h1_key

TI(德州仪器) SN74CBTLV1G125
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) SN74CBTLV1G125
  • TI(德州仪器) SN74CBTLV1G125
  • TI(德州仪器) SN74CBTLV1G125
  • TI(德州仪器) SN74CBTLV1G125
  • TI(德州仪器) SN74CBTLV1G125
  • TI(德州仪器) SN74CBTLV1G125
立即查看
您当前的位置: 首页 > 开关与多路复用器 > 模拟开关和多路复用器 > SN74CBTLV1G125
SN74CBTLV1G125

SN74CBTLV1G125

正在供货

3.3V、1:1 (SPST)、1 通道 FET 总线开关

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The SN74CBTLV1G125 features a single high–speed line switch. The switch is disabled when the output–enable (OE) input is high.

This device is fully specified for partial–power–down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

To ensure the high–impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.

  • 5– Switch Connection Between Two Ports
  • Rail–to–Rail Switching on Data I/O Ports
  • Ioff Supports Partial–Power–Down Mode Operation

Configuration1
Number of channels1
Power supply voltage - single (V)2.5, 3.3
ProtocolsAnalog
Ron (typ) (Ω)5
ON-state leakage current (max) (µA)1
Bandwidth (MHz)200
Operating temperature range (°C)-40 to 85
FeaturesPowered-off protection
Input/output continuous current (max) (mA)128
RatingCatalog
Drain supply voltage (max) (V)3.6
Supply voltage (max) (V)3.6
SOT-23 (DBV)58.12 mm² 2.9 x 2.8
SOT-SC70 (DCK)54.2 mm² 2 x 2.1
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部