The INA122 is a precision instrumentation amplifier for accurate, low noise differential signal acquisition. Its two-op-amp design provides excellent performance with very low quiescent current, and is ideal for portable instrumentation and data acquisition systems.
The INA122 can be operated with single power supplies from 2.2V to 36V and quiescent current is a mere 60µA. It can also be operated from dual supplies. By utilizing an input level-shift network, input common-mode range extends to 0.1V below negative rail (single supply ground).
A single external resistor sets gain from 5V/V to 10000V/V. Laser trimming provides very low offset voltage (250µV max), offset voltage drift (3µV/°C max) and excellent common-mode rejection.
Packages options include 8-pin plastic DIP and SO-8 surface-mount packages. Both are specified for the -40°C to +85°C extended industrial temperature range.
| Number of channels | 1 |
| Vs (max) (V) | 36 |
| Vs (min) (V) | 2.2 |
| Input offset (±) (max) (µV) | 250 |
| Voltage gain (min) (V/V) | 5 |
| Voltage gain (max) (V/V) | 10000 |
| Noise at 1 kHz (typ) (nV√Hz) | 60 |
| Features | Low power |
| CMRR (min) (dB) | 83 |
| Input offset drift (±) (max) (V/°C) | 0.000003 |
| Input bias current (±) (max) (nA) | 25 |
| Iq (typ) (mA) | 0.06 |
| Bandwidth at min gain (typ) (MHz) | 0.12 |
| Gain error (±) (max) (%) | 0.5 |
| Operating temperature range (°C) | -40 to 85 |
| Rating | Catalog |
| Type | Resistor |
| Gain nonlinearity (±) (max) (%) | 0.002 |
| Output swing headroom (to negative supply) (typ) (V) | 0.1 |
| Output swing headroom (to positive supply) (typ) (V) | -0.05 |
| Input common mode headroom (to negative supply) (typ) (V) | 0 |
| Input common mode headroom (to positive supply) (typ) (V) | -1.6 |
| Noise at 0.1 Hz to 10 Hz (typ) (µVPP) | 2 |
| PDIP (P) | 8 | 92.5083 mm² 9.81 x 9.43 |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |