The INA106 is a monolithic Gain = 10 differential amplifier consisting of a precision op amp and on-chip metal film resistors. The resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature.
The differential amplifier is the foundation of many commonly used circuits. The INA106 provides this precision circuit function without using an expensive resistor network. The INA106 is available in 8-pin plastic DIP and SO-8 surface-mount packages.
All trademarks are the property of their respective owners.
| Number of channels | 1 |
| Vs (min) (V) | 10 |
| Vs (max) (V) | 36 |
| CMRR (min) (dB) | 86 |
| Common-mode input low (min) (V) | -11 |
| Common-mode input high (max) (V) | 11 |
| Input offset (±) (max) (V) | 0.0002 |
| Iq (typ) (mA) | 1.5 |
| Slew rate (typ) (V/µs) | 3 |
| Voltage gain (min) (V/V) | 10 |
| Voltage gain (max) (V/V) | 10 |
| Small-signal bandwidth (typ) (Hz) | 5000000 |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 85 |
| Gain drift (max) (ppm/°C) | 4 |
| Gain error (±) (max) (%) | 0.025 |
| PDIP (P) | 8 | 92.5083 mm² 9.81 x 9.43 |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |