TPA6211A1-Q1 器件是一款 3.1W 单声道全差分放大器,设计用于驱动阻抗最低为 3Ω 的扬声器,而在大多数应用中仅占用 20‑mm2 的 印刷电路板 (PCB) 面积。此器件在 2.5V 至 5.5V 电压范围内运行,仅消耗 4mA 静态电源电流。TPA6211A1-Q1 器件采用节省空间的 8 引脚 HVSSOP 封装。
该器件包含的 特性 有 -80dB 的电源电压抑制(20Hz 至 2KHz)、改善的 RF 整流抗扰度以及较小的 PCB 占用面积。杂音极低的快速启动特性使得 TPA6211A1-Q1 器件成为了紧急呼叫应用的 理想之选。此外,该器件能够满足信息娱乐和仪表板 应用中的低功耗需求,这类应用包括仪表板蜂鸣装置或驾驶员通知。
| Audio input type | Analog Input |
| Architecture | Class-AB |
| Speaker channels (max) | Mono |
| Rating | Automotive |
| Power stage supply (max) (V) | 5.5 |
| Power stage supply (min) (V) | 2.5 |
| Load (min) (Ω) | 3 |
| Output power (W) | 3.1 |
| SNR (dB) | 105 |
| THD + N at 1 kHz (%) | 0.03 |
| Iq (typ) (mA) | 4 |
| Control interface | Hardware |
| Closed/open loop | Closed |
| Analog supply (min) (V) | 2.5 |
| Analog supply voltage (max) (V) | 5.5 |
| PSRR (dB) | 85 |
| Operating temperature range (°C) | -40 to 105 |
| HVSSOP (DGN) | 8 | 14.7 mm² 3 x 4.9 |