AFE49I30系列介绍资料

您当前的位置：首页 > 数据转换器 > 集成型和特殊功能数据转换器 > 医疗 AFE > AFE49I30

AFE49I30

正在供货

用于可穿戴式光学生物传感、具有 FIFO、I2C 和 ECG 的超低功耗集成 AFE

立即搜索现货

产品详情|
产品购买|

产品详情

说明
特性
参数
封装 | 引脚 | 尺寸

The AFE49I30 is an analog front-end for optical bio-sensing/ PPG and ECG measurement applications. The device supports up to six switching light-emitting diodes (LEDs) and up to four photodiodes. Up to 24 signal phases can be defined and the PPG or ECG signals can be acquired from each phase in a synchronized manner.

Supports signal acquisition of up to 24 phases
Flexible allocation of 6 LED, 4 PD in each PPG phase
Synchronized PPG/ECG signal acquisition with each phase configurable as PPG or ECG, and at different data rates
Synchronized PPG/ECG supports up to 1 kHz data rate
ECG-only mode supports up to 4 kHz data rate
PPG signal chain:
- System SNR up to 108-dB at 16 µA PD current
- Low current for continuous operation on a wearable device with a typical value: 15 µA for an LED, 20 µA for the receiver
PPG Transmitter:
- Supports common anode LED configuration
- 8-Bit programmable LED current with range adjustable from 25 mA to 250 mA
- Mode to fire two LEDs in parallel with independent per-phase current control
- Programmable LED on-time per-phase
- Simultaneous support of 6 LEDs for SpO₂, HRM, or multi-wavelength HRM
PPG Receiver:
- Supports 4 time-multiplexed photodiode inputs
- 2 parallel receivers to sample two PD channels simultaneously
- Individual ambient offset subtraction DAC at each TIA Input with 8-bit per-phase control and range adjustable up to 255-µA
- Individual LED offset subtraction DAC at each TIA input with 5-bit per-phase control and
  15.5-µA range
- Close to 100 dB ambient rejection up to 10 Hz
- Noise filtering with programmable bandwidth
- Transimpedance Gain: 3.7 kΩ to 1 MΩ
ECG Signal Chain
- 1-lead ECG with RLD output for bias
- INA gain programmable from 1.6 – 13
- <1 µVrms input noise (in a 1-150 Hz bandwidth) at 4-kHz sample rate
- Integrated 450 Hz Low Pass Filter
- AC, DC lead-off detect with 3.125-100 nA current and programmable interrupt
Supports external clock and internal oscillator modes
Option to acquire data synchronized with a system master clock
Automatic cancellation of DC from ambient, LED
FIFO with 128-sample depth
I²C interface
2.6-mm × 2.1-mm DSBGA, 0.4-mm pitch
Supplies: Rx: 1.7 V-1.9 V (LDO bypass); 1.9 V-3.6 V (LDO enabled), Tx: 3 V-5.5 V, IO: 1.7-3.6 V
Supports operation with 2 supplies - 1.8 V, 5 V

Applications	1-lead ECG, Optical-HRM
Number of input channels	4
Resolution (Bits)	22
Number of LEDs	6
Interface type	I2C
Operating temperature range (°C)	-40 to 85
Rating	Catalog

DSBGA (YZ)

4.8 mm² 2.4 x 2

产品购买

商品型号
封装
工作温度
包装
价格
现货库存
操作

* 我的问题/建议：
* 联系电话：
上传图片（选填）：	请您提交2M以内的jpg,gif,png格式文件
投诉订单号（选填）：

h1_key

AFE49I30

用于可穿戴式光学生物传感、具有 FIFO、I2C 和 ECG 的超低功耗集成 AFE

4000-306-326