h1_key

TI(德州仪器) SN65LBC172A
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) SN65LBC172A
  • TI(德州仪器) SN65LBC172A
  • TI(德州仪器) SN65LBC172A
  • TI(德州仪器) SN65LBC172A
  • TI(德州仪器) SN65LBC172A
  • TI(德州仪器) SN65LBC172A
立即查看
您当前的位置: 首页 > 接口 > RS-485 和 RS-422 收发器 > SN65LBC172A
SN65LBC172A

SN65LBC172A

正在供货

四路 RS-485 差分线路驱动器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The SN65LBC172A and SN75LBC172A are quadruple differential line drivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

These devices are optimized for balanced multipoint bus transmission at signalling rates up to 30 million bits per second. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry making it suitable for high-speed mulitpoint data transmission applications in noisy environments. These devices are designed using LinBiCMOS™, facilitating low power consumption and robustness.

The G and G inputs provide driver enable control using either positive or negative logic. When disabled or powered off, the driver outputs present a high-impedance to the bus for reduced system loading.

The SN75LBC172A is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC172A is characterized over the temperature range from -40°C to 85°C.

  • Designed for TIA/EIA-485, TIA/EIA-422, andISO 8482 Applications
  • Signaling Rates up to 30 Mbps
  • Propagation Delay Times <11 ns
  • Low Standby Power Consumption
    1.5 mA Max
  • Output ESD Protection 12 kV
  • Driver Positive- and Negative-Current Limiting
  • Power-Up and Power-Down Glitch-Free for Live Insertion Applications
  • Thermal Shutdown Protection
  • Industry Standard Pin-Out, Compatible With SN75172, AM26LS31, DS96172, LTC486, and MAX3045

LinBiCMOS is a trademark of Texas Instruments.
The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

Number of receivers0
Number of transmitters4
Supply voltage (nom) (V)5
Signaling rate (max) (MBits)30
Fault protection (V)-10 to 15
Common-mode range (V)-7 to 12
Number of nodes32
IsolatedNo
Supply current (max) (µA)23000
RatingCatalog
Operating temperature range (°C)-40 to 85
PDIP (N)16181.42 mm² 19.3 x 9.4
SOIC (DW)16106.09 mm² 10.3 x 10.3
SOIC (DW)20131.84 mm² 12.8 x 10.3
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部