The SN74LV8153 is a serial-to-parallel data converter. It accepts serial input data and outputs 8-bit parallel data.
The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings.
The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC1 through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
| Configuration | Serial-in, Parallel-out |
| Bits (#) | 8 |
| Technology family | LV-A |
| Supply voltage (min) (V) | 3 |
| Supply voltage (max) (V) | 5.5 |
| Input type | Schmitt-Trigger |
| Output type | Push-Pull |
| Clock frequency (MHz) | 0.012 |
| IOL (max) (mA) | 40 |
| IOH (max) (mA) | -24 |
| Supply current (max) (µA) | 20000 |
| Features | Over-voltage tolerant inputs, Partial power down (Ioff), Standard speed (tpd > 50ns) |
| Operating temperature range (°C) | -40 to 125 |
| Rating | Automotive |
| TSSOP (PW) | 20 | 41.6 mm² 6.5 x 6.4 |
关注公众号，优惠活动早知道！
Copyright ©2023 wlxmall.com万联芯城版权所有 | 电信与信息服务业务经营许可证100798号 | 粤ICP备14012234号 | 投诉建议
客服电话：4000-306-326 文明办网文明上网举报电话：010-82615762 违法不良信息举报中心
| * 我的问题/建议： | |
| * 联系电话： | |
| 上传图片（选填）： |
请您提交2M以内的jpg,gif,png格式文件 |
| 投诉订单号（选填）： | |
购物车中还没有商品，赶紧选购吧！
正在供货
加入购物车
