This octal buffer/line driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVC244 is organized as two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
| Technology family | ALVC |
| Supply voltage (min) (V) | 1.65 |
| Supply voltage (max) (V) | 3.6 |
| Number of channels | 8 |
| IOL (max) (mA) | 24 |
| Supply current (max) (µA) | 24 |
| IOH (max) (mA) | -24 |
| Input type | Standard CMOS |
| Output type | 3-State |
| Features | Balanced outputs, Bus-hold, Damping resistors, Very high speed (tpd 5-10ns) |
| Rating | HiRel Enhanced Product |
| Operating temperature range (°C) | -40 to 85 |
| TSSOP (PW) | 20 | 41.6 mm² 6.5 x 6.4 |
关注公众号，优惠活动早知道！
Copyright ©2023 wlxmall.com万联芯城版权所有 | 电信与信息服务业务经营许可证100798号 | 粤ICP备14012234号 | 投诉建议
客服电话：4000-306-326 文明办网文明上网举报电话：010-82615762 违法不良信息举报中心
| * 我的问题/建议： | |
| * 联系电话： | |
| 上传图片（选填）： |
请您提交2M以内的jpg,gif,png格式文件 |
| 投诉订单号（选填）： | |
购物车中还没有商品，赶紧选购吧！
正在供货
加入购物车
