h1_key

TI(德州仪器) SN74ABT541B-EP
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) SN74ABT541B-EP
  • TI(德州仪器) SN74ABT541B-EP
  • TI(德州仪器) SN74ABT541B-EP
  • TI(德州仪器) SN74ABT541B-EP
  • TI(德州仪器) SN74ABT541B-EP
  • TI(德州仪器) SN74ABT541B-EP
立即查看
您当前的位置: 首页 > 逻辑和电压转换 > 缓冲器、驱动器和收发器 > 同相缓冲器和驱动器 > SN74ABT541B-EP
SN74ABT541B-EP

SN74ABT541B-EP

正在供货

具有 TTL 兼容型 CMOS 输入和三态输出的 8 通道、4.5V 至 5.5V 缓冲器(增强型产品)

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The SN74ABT541B octal buffer and line driver is ideal for driving bus lines or buffering memory address registers. The device features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.

The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state.

When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree
  • State-of-the-Art EPIC-IIB™ BiCMOS Design Significantly Reduces Power Dissipation
  • Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
  • Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
  • High-Impedance State During Power Up and Power Down
  • High-Drive Outputs (–32-mA IOH, 64-mA IOL)

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
EPIC-IIB is a trademark of Texas Instruments.

Technology familyABT
Supply voltage (min) (V)4.5
Supply voltage (max) (V)5.5
Number of channels8
IOL (max) (mA)64
Supply current (max) (µA)30000
IOH (max) (mA)-32
Input typeTTL-Compatible CMOS
Output type3-State
FeaturesOver-voltage tolerant inputs, Partial power down (Ioff), Ultra high speed (tpd <5ns)
RatingHiRel Enhanced Product
Operating temperature range (°C)-40 to 85
TSSOP (PW)2041.6 mm² 6.5 x 6.4
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部