h1_key

TI(德州仪器) SN74AHCT540
德州仪器 (TI) 全系列产品在线购买
  • TI(德州仪器) SN74AHCT540
  • TI(德州仪器) SN74AHCT540
  • TI(德州仪器) SN74AHCT540
  • TI(德州仪器) SN74AHCT540
  • TI(德州仪器) SN74AHCT540
  • TI(德州仪器) SN74AHCT540
立即查看
您当前的位置: 首页 > 逻辑和电压转换 > 缓冲器、驱动器和收发器 > 反向缓冲器和驱动器 > SN74AHCT540
SN74AHCT540

SN74AHCT540

正在供货

具有 TTL 兼容型 CMOS 输入的 8 通道 4.5V 至 5.5V 反相器

产品详情
  • 说明
  • 特性
  • 参数
  • 封装 | 引脚 | 尺寸

The ’AHCT540 octal buffers/drivers are ideal for driving bus lines or buffer memory address registers. These devices feature inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.

The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide inverted data when they are not in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

  • Inputs Are TTL-Voltage Compatible
  • Latch-Up Performance Exceeds 250 mA Per JESD 17
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

Technology familyAHCT
Supply voltage (min) (V)4.5
Supply voltage (max) (V)5.5
Number of channels8
IOL (max) (mA)8
IOH (max) (mA)-8
Supply current (max) (µA)40
Input typeTTL-Compatible CMOS
Output typePush-Pull
FeaturesBalanced outputs, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)
RatingCatalog
Operating temperature range (°C)-40 to 125
PDIP (N)20228.702 mm² 24.33 x 9.4
SOIC (DW)20131.84 mm² 12.8 x 10.3
SOP (NS)2098.28 mm² 12.6 x 7.8
SSOP (DB)2056.16 mm² 7.2 x 7.8
TSSOP (PW)2041.6 mm² 6.5 x 6.4
TVSOP (DGV)2032 mm² 5 x 6.4
产品购买
  • 商品型号
  • 封装
  • 工作温度
  • 包装
  • 价格
  • 现货库存
  • 操作
10s
温馨提示:
订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
返回顶部