This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH162344 is used in applications in which four separate memory locations must be addressed by a single address.
The outputs, which are designed to sink up to 12 mA, include equivalent 26-
resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, the output-enable (OE) inputs should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
Widebus is a trademark of Texas Instruments.
| Technology family | ALVC |
| Supply voltage (min) (V) | 1.65 |
| Supply voltage (max) (V) | 3.6 |
| Number of channels | 8 |
| IOL (max) (mA) | 12 |
| Supply current (max) (µA) | 40 |
| IOH (max) (mA) | -12 |
| Input type | Standard CMOS |
| Output type | 3-State |
| Features | Balanced outputs, Bus-hold, Damping resistors, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns) |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 85 |
| SSOP (DL) | 56 | 190.647 mm² 18.42 x 10.35 |
| TSSOP (DGG) | 56 | 113.4 mm² 14 x 8.1 |
关注公众号，优惠活动早知道！
Copyright ©2023 wlxmall.com万联芯城版权所有 | 电信与信息服务业务经营许可证100798号 | 粤ICP备14012234号 | 投诉建议
客服电话：4000-306-326 文明办网文明上网举报电话：010-82615762 违法不良信息举报中心
| * 我的问题/建议： | |
| * 联系电话： | |
| 上传图片（选填）： |
请您提交2M以内的jpg,gif,png格式文件 |
| 投诉订单号（选填）： | |
购物车中还没有商品，赶紧选购吧！
正在供货
加入购物车
