LM7332 器件是一款双通道轨至轨输入和输出放大器,工作温度范围较宽(−40°C 至 +125°C),可满足汽车、工业和电源 应用的需求。LM7332 的输出电流为 100mA,高于大多数单片运算放大器的输出电流。具有高输出电流要求的电路设计通常需要分立式晶体管,因为许多运算放大器的电流输出较低。LM7332 具有足够大的电流输出,能够直接驱动许多负载,从而节省分立式晶体管所需的成本和空间。
极宽的工作电源电压范围(2.5V 至 32V)减轻了在极端条件下对于功能的任何担忧,并为多种 应用带来了灵活性。该器件的大部分参数对电源电压变化不敏感;这种在设计上的改进又进一步简化了使用。较大的轨至轨输入共模电压范围使得该器件可在许多 应用(包括高侧和低侧感应)中运行,而不会超出输入范围。
LM7332 可驱动无限的容性负载而不会出现振荡。
LM7332 采用 8 引脚 VSSOP 和 SOIC 封装。
| Number of channels | 2 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 32 |
| Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 2.5 |
| Rail-to-rail | In, Out |
| GBW (typ) (MHz) | 19 |
| Slew rate (typ) (V/µs) | 12 |
| Vos (offset voltage at 25°C) (max) (mV) | 4 |
| Iq per channel (typ) (mA) | 0.75 |
| Vn at 1 kHz (typ) (nV√Hz) | 14.8 |
| Rating | Catalog |
| Operating temperature range (°C) | -40 to 125 |
| Offset drift (typ) (µV/°C) | 2 |
| Features | High Cload Drive |
| Input bias current (max) (pA) | 200000 |
| CMRR (typ) (dB) | 74 |
| Iout (typ) (A) | 0.09 |
| Architecture | Bipolar |
| Input common mode headroom (to negative supply) (typ) (V) | -0.3 |
| Input common mode headroom (to positive supply) (typ) (V) | 0.3 |
| Output swing headroom (to negative supply) (typ) (V) | 0.02 |
| Output swing headroom (to positive supply) (typ) (V) | -0.1 |
| SOIC (D) | 8 | 29.4 mm² 4.9 x 6 |
| VSSOP (DGK) | 8 | 14.7 mm² 3 x 4.9 |