Microchip微芯 MCP1253 产品介绍
2026-04-14
0次
说明
MCP1253-33X50和MCP1253-ADJ是无电感、正调节、低噪声电荷泵直流-直流转换器。MCP1253-33X50具有3.3或5.0 V的可选输出,而MCP1253-ADJ具有1.5至5.5 V之间的可调输出。两者都可以在选定的调节输出电压下提供120 mA的负载电流。由于该设备包含自动降压/升压功能,无论输入电压高于还是低于输出电压,它都将保持调节的输出电压。这些电荷泵的开关频率为1 MHz(减少了电容器尺寸),具有节能关闭引脚、短路保护、热关闭和报告超出调节条件的电源良好引脚。
特性
- Wide 2.1 to 5.0V input range
- Fixed, regulated 3.3 V, 5.0 V, or adjustable (1.5 to 5.5 V) outputs
- Supplies regulated output voltagesfor up to 120 mA loads
- Low 60 µA supply current in no load conditions
- High 2.5% voltage accuracy (on fixed voltage outputs)
- High1 MHz operation to avoid interference with IF bands and allows for small capacitor use to save board space and cost
- Logic level shutdown control reduces current consumption to 0.1 µA during standby operation
- Power-good output indicator with hysteresis
- Thermal shutdown protection with hysteresis
- Short circuit protection
- Soft-start circuitry to minimize inrush current
- -40 ºC to +85 ºC operation
参数
类型 | 描述 |
Output Voltage | Selectable 3.3V/5.0V, or Adjustable 1.5V to 5.5V |
Temp Range Max | 85 |
Temp. Range Min. | -45 |



购物车中还没有商品,赶紧选购吧!

正在供货



