说明
MIC22950是一款高效10A集成开关同步降压调节器。MIC22950的开关频率可编程,从400kHz到2MHz,使客户能够优化设计以提高效率或实现最小占地面积。MIC22950实现了95%以上的效率,同时在宽负载范围内仍以2MHz进行开关。
即使在FPGA和低压ASIC中常见的极端瞬态负载波动下,超高速控制回路也能将输出电压保持在规定范围内。输出电压可以向下调整到0.7V,以满足所有低压电源需求。
MIC22950具有全方位的测序和追踪选项。使能引脚和延迟引脚与电源良好引脚相结合,允许在开启和关闭期间以多种方式对多个输出进行排序。RC(Ramp Control™)引脚允许设备连接到MIC22x00系列产品中的任何其他设备,以在启动期间将输出电压保持在特定的ΔV内。
特性
- 2.6V to 5.5V supply voltage
- Fully integrated MOSFET switches
- Adjustable output voltage option down to 0.7V
- Output load current up to 10A
- Full sequencing and tracking capability
- Power On Reset
- Efficiency >95% across a broad load range
- Operating frequency programmable: 400kHz to 2MHz
- Ultra-fast transient response
- 100% maximum duty cycle
- Micropower shutdown
- Thermal shutdown and current-limit protection
- -40°C to +125°C junction temperature range
参数
类型 | 描述 |
Max Duty Cycle (%) | 1 |
Input Voltage Range Max | 5.5 |
Input Voltage Range Min | 2.6 |
# of Outputs | 1 |
Output Current | 10000 |
Driver Type | Step Down (Buck) |
QuiescentCurrent | 1 |
Synchronous Rectifier | Yes |
Temp Range Max | 125 |
Temp Range Min | -40 |
VoutMax | 5.5 |
Vfb (V) | 0.7 |
VoutMin | 0.7 |
Vref (V) | 0 |



购物车中还没有商品,赶紧选购吧!

正在供货



