h1_key

当前位置:首页 >新闻资讯 > 产品资讯>亚德诺>ADI亚德诺 TMC8461 产品介绍

TMC8461

最后购买期限

OBSOLETE PRODUCT

ADI亚德诺 TMC8461 产品介绍
2026-03-09 0次

特性


  • Standard compliant EtherCAT® Slave
  • 2 MII Interfaces for external Ethernet PHY
  • SPI Process Data Interface (PDI)
  • IO Block with 24 Multi-Function I/Os
  • Internal 3.3V plus free 5V-24V switch regulator
  • 8 High Voltage I/Os (up to 35V, 100mA)
  • Multifunction block comprises Watchdog, 4 PWM outputs and Step/Dir generator
  • Direct EtherCAT access to external ADCs, stepper motor controllers, etc.
  • EtherCAT-P compatible voltage range

产品详情和应用


The TMC8461 is a complete EtherCAT® Slave Controller optimized for real time. It comprises all blocks required for an EtherCAT slave including two switch regulator power supplies and 35V capable high voltage I/Os for industrial environments. Timer, watchdog, PWM and SPI/ IIC master units allow for enhanced capabilities either in device emulation mode or in combination with an external CPU.

The TMC8461 can also be used in combination with EtherCAT P, allowing for both data and power to be supplied using one single cable. Click here to learn more.

APPLICATIONS

  • Factory Automation
  • Process Automation
  • Communication Modules
  • Industrial IoT
  • Industry 4.0
  • Sensors & Encoders
  • Robotics
  • Industrial Motion Control
  • Building Automation
  • ADI亚德诺 ADG738 产品介绍
  • ADG738是一款8通道、3线串行接口控制的CMOS模拟矩阵开关/多路复用器。开关之间的导通电阻严格匹配,并在全信号范围内具有非常好的平坦度。
    2026-03-09 76次
  • ADI亚德诺 MAX4644 产品介绍
  • MAX4644是一款单刀/双掷(SPDT)开关,采用+1.8V至+5.5V的单电源供电。它在整个模拟信号范围内提供4Ω低导通电阻(RON)以及1Ω RON平坦度。MAX4644提供小于20ns的快速开关时间,同时确保先开后合式开关动作。其典型静态功耗为0.01µW,因此适合在低功耗便携式应用中使用。
    2026-03-09 807次
  • ADI亚德诺 ADG1334 产品介绍
  • ADG1334是一款单芯片CMOS器件,内置四个采用CMOS工艺设计的独立可选单刀双掷(SPDT)开关。
    2026-03-09 787次
  • ADI亚德诺 MAX398 产品介绍
  • MAX398/MAX399精密、单片、CMOS模拟多路复用器具有低导通电阻(小于100Ω),通道间匹配电阻在6Ω以内,并在额定模拟信号范围内保持平坦(最大11Ω)。其在整个温度范围内具有较低漏电流(+85°C时NO关断漏电流小于2.5nA)和快速开关速度(转换时间不到250ns)。MAX398为8通道器件,MAX399为双路4通道器件。
    2026-03-09 800次
  • ADI亚德诺 DG1208 产品介绍
  • DG1208和DG1209均为低泄漏、低电荷注入、单路8通道或双路4通道多路复用开关器件。DG1208使用三个选择输入(A2、A1和A0)来确定开关逻辑;DG1209使用两个选择输入(A1和A0)。两款器件都使用使能(EN)输入来使能或禁用器件。
    2026-03-09 230次
    10s
    温馨提示:
    订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
    返回顶部