h1_key

当前位置:首页 >新闻资讯 > 产品资讯>亚德诺>ADI亚德诺 TMC4671 产品介绍

TMC4671

推荐用于新设计

Fully integrated servo controller, providing Field Oriented Control for BLDC/PMSM and 2-phase Stepper Motors as well as DC motors and voice coils.

ADI亚德诺 TMC4671 产品介绍
2026-03-09 0次

特性


  • Servo Controller w/ Field Oriented Control (FOC)
  • Torque Control (FOC) Velocity Control, Position Control
  • Integrated ADCs, ∆Σ-ADC front-end
  • Encoder Engine: Hall analog/digital, Encoder analog/digital
  • Supports 3-Phase PMSM/BLDC, 2-Phase Stepper Motors, and 1-Phase DC Motors
  • Fast PWM Engine (25kHz to 100kHz)
  • Application SPI + Debug (UART, SPI)
  • Step-Direction Interface (S/D)

产品详情和应用


The TMC4671 is a fully integrated servo controller, providing Field Oriented Control (FOC) for BLDC/PMSM and 2-phase stepper motors as well as DC motors and voice coils. All control functions are implemented in hardware. Integrated ADCs, position sensor interfaces, position interpolators, enable a fully functional servo controller for a wide range of servo applications.

If you like to see a step by step guide on driving a linear stage with the TMC4671, please visit the blog post where one of ADI Trinamic's Engineers explains in 3 posts how to set up your linear stage, how to tune the controller using the TMCL-IDE, and how to adapt the firmware to your own project.

Quick Setup Guide

APPLICATIONS:

  • Robotics
  • Pick and Place Machines
  • Factory Automation
  • E-Mobility
  • Laboratory Automation
  • Blowers
  • Pumps
  • ADI亚德诺 ADG738 产品介绍
  • ADG738是一款8通道、3线串行接口控制的CMOS模拟矩阵开关/多路复用器。开关之间的导通电阻严格匹配,并在全信号范围内具有非常好的平坦度。
    2026-03-09 76次
  • ADI亚德诺 MAX4644 产品介绍
  • MAX4644是一款单刀/双掷(SPDT)开关,采用+1.8V至+5.5V的单电源供电。它在整个模拟信号范围内提供4Ω低导通电阻(RON)以及1Ω RON平坦度。MAX4644提供小于20ns的快速开关时间,同时确保先开后合式开关动作。其典型静态功耗为0.01µW,因此适合在低功耗便携式应用中使用。
    2026-03-09 807次
  • ADI亚德诺 ADG1334 产品介绍
  • ADG1334是一款单芯片CMOS器件,内置四个采用CMOS工艺设计的独立可选单刀双掷(SPDT)开关。
    2026-03-09 787次
  • ADI亚德诺 MAX398 产品介绍
  • MAX398/MAX399精密、单片、CMOS模拟多路复用器具有低导通电阻(小于100Ω),通道间匹配电阻在6Ω以内,并在额定模拟信号范围内保持平坦(最大11Ω)。其在整个温度范围内具有较低漏电流(+85°C时NO关断漏电流小于2.5nA)和快速开关速度(转换时间不到250ns)。MAX398为8通道器件,MAX399为双路4通道器件。
    2026-03-09 800次
  • ADI亚德诺 DG1208 产品介绍
  • DG1208和DG1209均为低泄漏、低电荷注入、单路8通道或双路4通道多路复用开关器件。DG1208使用三个选择输入(A2、A1和A0)来确定开关逻辑;DG1209使用两个选择输入(A1和A0)。两款器件都使用使能(EN)输入来使能或禁用器件。
    2026-03-09 230次
    10s
    温馨提示:
    订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
    返回顶部