h1_key

当前位置:首页 >新闻资讯 > 产品资讯>亚德诺>ADI亚德诺 TMC6140 产品介绍

TMC6140

推荐用于新设计

Low voltage BLDC motor driver 5 to 30V, for external N-channel MOSFETs, integrated lowside chargepump for low RDSon at low battery voltage

ADI亚德诺 TMC6140 产品介绍
2026-03-09 0次

特性


  • 3-phase motors up to 100 A coil current (external MOSFETs)
  • Voltage Range 5 to 30 V DC
  • Gate Drive 0.5 A or 1.0 A
  • 3V3 Switching Regulator (0.5 A) with internal Schottky diode (up to 100 mA)
  • Diagnostics output via UART-TxD
  • Charge pump pin to utilize buck converter for step-up converter
  • 3 Bottom Shunt Amplifiers
  • Analog programmable short detect
  • 2 Low Power Modes with 0.25 mA standby current consumption Applications

产品详情和应用


TMC6140 is a fully integrated universal 3-phase MOSFET gate driver for PMSM servo or BLDC motors. External MOSFETs for up to 100 A motor current are supported. Three bottom shunt amplifiers allow easy current sensing and enhanced commutation of the motor. A switching regulator (3.3 V, 0.5 A, internal Schottky diode for up to 100mA) generates enough power for the IOs and the micro controller. Further on, it can serve as step-up converter to stabilize statically the gate voltages of the MOSFETs. A DIAG output for further diagnostics and two different power down modes are available.

APPLICATIONS:

  • Industrial Drives
  • Power Tools
  • Robotics
  • Textile Machines
  • Factory Automation
  • Laboratory Automation
  • Pumps
  • Fans
  • Battery Operated Devices
  • ADI亚德诺 ADG738 产品介绍
  • ADG738是一款8通道、3线串行接口控制的CMOS模拟矩阵开关/多路复用器。开关之间的导通电阻严格匹配,并在全信号范围内具有非常好的平坦度。
    2026-03-09 76次
  • ADI亚德诺 MAX4644 产品介绍
  • MAX4644是一款单刀/双掷(SPDT)开关,采用+1.8V至+5.5V的单电源供电。它在整个模拟信号范围内提供4Ω低导通电阻(RON)以及1Ω RON平坦度。MAX4644提供小于20ns的快速开关时间,同时确保先开后合式开关动作。其典型静态功耗为0.01µW,因此适合在低功耗便携式应用中使用。
    2026-03-09 807次
  • ADI亚德诺 ADG1334 产品介绍
  • ADG1334是一款单芯片CMOS器件,内置四个采用CMOS工艺设计的独立可选单刀双掷(SPDT)开关。
    2026-03-09 787次
  • ADI亚德诺 MAX398 产品介绍
  • MAX398/MAX399精密、单片、CMOS模拟多路复用器具有低导通电阻(小于100Ω),通道间匹配电阻在6Ω以内,并在额定模拟信号范围内保持平坦(最大11Ω)。其在整个温度范围内具有较低漏电流(+85°C时NO关断漏电流小于2.5nA)和快速开关速度(转换时间不到250ns)。MAX398为8通道器件,MAX399为双路4通道器件。
    2026-03-09 800次
  • ADI亚德诺 DG1208 产品介绍
  • DG1208和DG1209均为低泄漏、低电荷注入、单路8通道或双路4通道多路复用开关器件。DG1208使用三个选择输入(A2、A1和A0)来确定开关逻辑;DG1209使用两个选择输入(A1和A0)。两款器件都使用使能(EN)输入来使能或禁用器件。
    2026-03-09 230次
    10s
    温馨提示:
    订单商品问题请移至我的售后服务提交售后申请,其他需投诉问题可移至我的投诉提交,我们将在第一时间给您答复
    返回顶部